How To Configure the Linksys Wireless G Web Camera

image of linksys model wvc54gc web camera
Linksys Wireless-G Internet Video Camera

A lot of people seem to be having trouble setting up this product... Here are four (4) steps to help get this unit up and running.

1: Configuring your router: In your router's configuration, you should assign this device a fixed IP outside of the range of DHCP addresses. This is so that, the next time you reboot your router or cable modem, DHCP doesn't assign the camera a different IP. Remember, DHCP hands out IPs on a first-come, first-serve basis unless you tell it otherwise. So, if you defined your router's DHCP to start with, let's say, 100, when you set up the camera, you can give it a fixed IP of (or whatever) and know that it will persist.

2. Opening your port: Be sure to choose a port number greater than 1024. Also, check your port forwarding page before deciding so that you don't conflict with other applications/services you have installed. When you pick your port, enable it to forward TCP requests to the IP you've specified, in my example

3. Accessing from outside: You will need the external IP address, which you can get from your router's status page. DON'T FORGET TO APPEND THE PORT NUMBER TO THE URL! That's a common mistake. If your public IP is, then your camera's URL would be http :// NOTE: If, when you look at your router's status page, you're confused because your WAN (external) IP begins with 192.168, then the next step probably applies to you...

4. IF YOU USE VONAGE or some other VoIP, there's an EXTRA STEP! Don't forget that the Vonage box sits between your cable modem and your router, acting as its own little firewall. Not only do you need to open the port here too, but also this is where you'd go to obtain your external IP! For Vonage subscribers, the configuration tool is accessible via > Advanced Configuration. In this menu, forward TCP requests to the desired port number at your ROUTER's IP address (Vonage customers:, NOT your camera's. Your router will then proxy the request to the camera, so it's like this: -> Internet -> your VoIP -> your ROUTER -> your camera

ok, enuff said - good luck and happy internet cam broadcasting and viewing.